產品型錄Product Catalog 2026
依維修系統分成 6 大類、17 個子類，共 56 款型號。
煞車系統
Brake Service碟煞活塞回壓與煞車油更換。
碟煞活塞回壓器Disc Brake Spreaders
把卡鉗活塞壓回缸體，不傷油封與活塞。
3 款
單人煞車油更換器One-Person Brake Bleeder
一個人就能排空氣、換油，附止回閥與掛鉤。
1 款
前叉與避震
Fork & Suspension前叉油封安裝、油面調整與避震彈簧壓縮。
前叉油封安裝套組Fork Seal Driver Kits
可調式或多尺寸轉接，涵蓋常見前叉管徑。
5 款
KS-207-KMotorcycle Fork Seal Driver KitAdjustable inserts, Ø30–45 and Ø46–54 mm
KS-207-30-45Motorcycle Fork Seal Driver, 30–45Adjustable insert, Ø30–45 mm
KS-207-37-49Motorcycle Fork Seal Driver, 37–49Adjustable insert, Ø37–49 mm
KS-207-46-54Motorcycle Fork Seal Driver, 46–54Adjustable insert, Ø46–54 mm
KS-207-35-50Motorcycle Fork Seal Driver Set, 35–506 adapters for Ø35–50 mm forks單尺寸前叉油封安裝器Single-Size Fork Seal Drivers
一支對一個管徑，依前叉規格選用。
7 款
KS-207-3536Motorcycle Fork Seal Driver, 35/36 mmFor 35 and 36 mm forks
KS-207-37Motorcycle Fork Seal Driver, 37 mmFor 37 mm forks
KS-207-39Motorcycle Fork Seal Driver, 39 mmFor 39 mm forks
KS-207-43Motorcycle Fork Seal Driver, 43 mmFor 43 mm forks
KS-207-4647Motorcycle Fork Seal Driver, 46/47 mmFor 46 and 47 mm forks
KS-207-48Motorcycle Fork Seal Driver, 48 mmFor 48 mm forks
KS-207-4950Motorcycle Fork Seal Driver, 49/50 mmFor 49 and 50 mm forks前叉油面與避震工具Fork Oil & Shock Tools
調整前叉油面、拆裝避震彈簧。
2 款
引擎與傳動
Engine & Drivetrain飛輪、離合器拆卸，化油器調整與風扇離合器扳手。
飛輪拔取器Flywheel Pullers
依螺紋規格選用，拆卸飛輪或轉子。
7 款
KS-208-20Flywheel Puller, M20M20 × P1.5
KS-208-22Flywheel Puller, M22M22 × P1.5
KS-208-2427Flywheel Puller, M24 & M27M12 × P1.25, M24 × P1.0, M27 × P1.0 (L)
KS-208-28Flywheel Puller, M28M16 × P1.5, M28 × P1.0, M14 × P1.25 cap, M12 × P1.25 cap
KS-208-33Flywheel Puller, M33M16 × P1.5, M33 × P1.5
KS-208-35Flywheel Puller, M35M16 × P1.5, M35 × P1.5
KS-208-50Flywheel Puller, M50 (L)M18 × P1.5, M50 × P1.5 (L)離合器拔取器Primary Drive Clutch Pullers
一體式鍛造結構，拆卸驅動離合器。
6 款
KS-211-CP8Primary Drive Clutch Puller, CP8Length 365 mm, hex 21 mm
KS-211-CP10Primary Drive Clutch Puller, CP10Length 200 mm, hex 19 mm
KS-211-CP12Primary Drive Clutch Puller, CP12Length 160 mm, hex 21 mm
KS-211-CP16Primary Drive Clutch Puller, CP16Length 205 mm, hex 19 mm
KS-211-SCP1Primary Drive Clutch Puller, SCP1Length 140 mm, hex 27 mm
KS-211-PCP16Primary Drive Clutch Puller, PCP16Length 265 mm, hex 22 mm化油器調整套組Carburetor Tool Kits
90 度角度起子，伸進難以到達的混合比螺絲。
3 款
KS-202-2A90-Degree Angle Screwdriver Kit for Moto Carburetors, 2ASlotted head + 7 interchangeable bits
KS-202-2AD90-Degree Angle Screwdriver Kit for Moto Carburetors, 2ADSlotted head + 8 interchangeable bits
KS-202-3A90-Degree Angle Screwdriver Kit for Moto Carburetors, 3ASlotted + hexagon heads, 7 bits化油器調整起子Carburetor Screwdrivers
單支起子，調整化油器混合比螺絲。
5 款
KS-202-LAngle Screwdriver for Moto Carburetors, L type412 mm, blade tip 1.5 × 0.8 mm
KS-202-D1Screwdriver for Moto Carburetors, D type, 220 mmD type, length 220 mm
KS-202-D2Screwdriver for Moto Carburetors, D type, 50 mmD type, length 50 mm, body Ø22 mm
KS-202-D3Screwdriver for Moto Carburetors, D type, 210 mmD type, length 210 mm, body Ø22 mm
KS-202-D4Screwdriver for Moto Carburetors, D type, 200 mmD type, length 200 mm風扇離合器扳手Fan Clutch Wrenches
拆裝風扇離合器鎖緊螺帽，並固定水泵皮帶輪。
2 款
油封與防塵套
Seals & Boots油封拆除與拉桿頭防塵套鋼環安裝。
油封拔取器Oil Seal Pullers
T 型把手，拆除油封而不傷殼體。
2 款
拉桿頭防塵套鋼環安裝器Tie Rod Boot Ring Installers
以錐形杯撐開鋼環，再用推套裝入。
2 款
輪胎與車把
Tires & Handlebar越野車胎更換與把手握把處理。
輪胎更換Tire Changing
摺疊收納，協助安裝越野車胎。
1 款
把手工具Handlebar Grip Tools
切齊握把端部，安裝護手或端塞前使用。
1 款
通用維修輔助
General Workshop刮刀、軟管鉗與接頭拆卸，維修現場常用的輔助工具。
刮刀Scraper Knives
刮除液態墊片，有單支與三支套組。
5 款
軟管鉗Hose Remover Pliers
拆卸真空管與油管。
3 款
接頭拆卸Connector Release
壓下接頭鎖扣，快速分離線束接頭。
1 款
找不到符合的產品試試較短的關鍵字，例如型號 “KS-207” 或尺寸 “46”。